Analysis of Ultrasonic Plastic Welding Technology:
    Ultrasonic welding broadly refers to the process of fusing two thermoplastic products. When the ultrasound stops vibrating, the solid material has melted and the weld is complete. Joint strength approaches that of a single continuous piece of material; as long as the joint faces are properly designed, a complete hermetic seal is no problem at all.
    Staking in ultrasonic welding technology: the process of melting to form a mechanical lock — a plastic stud of a different material. 
    Insertion in ultrasonic welding technology:  embedding a metal part into a pre-formed hole in a plastic product. It offers high strength, short molding cycles, and fast installation — similar to inserts in mold design!
    Forming in ultrasonic welding technology: ultrasound melts part of a fitting and reforms it into a raised plastic boss, a plastic tube, or another extruded feature. Its advantages are fast processing, low internal stress, good appearance, and overcoming the inherent limitations of the material.
    Spot welding in ultrasonic welding technology: spot welding locally joins two thermoplastic assemblies that have no pre-formed joint or energy director. Spot welding also produces a strong bonded structure, especially suited to large parts, plastic sheets with raised features, cast thermoplastics, and products with complex structures where the joint faces are hard to reach. 
    Cutting and sealing in ultrasonic welding technology: an ultrasonic process for cutting and sealing ordered and disordered thermoplastic materials. Edges sealed this way do not crack and show no burrs or curled edges. 
    Sealing of textiles/films in ultrasonic welding technology: sealing of textiles and some films can also use ultrasound. It can tightly press films together and neatly cut and seal textiles locally. Seaming also serves a decorative purpose.
    Ultrasonic welding: a horn vibrating at ultrasonic frequency generates frictional heat under preset time and pressure, fusing the plastic joint faces — strong, fast, and convenient.
    Ultrasonic insertion:  ultrasonic vibration from the horn travels between the metal and the plastic; frictional heat melts the plastic contact face so the metal stud is forced into the plastic hole. 
    Ultrasonic staking: for encapsulation, a pin on the plastic part passes through a hole in the metal part; a high-amplitude horn vibrates the end of the pin, melting it so it flows along the horn contact face into a rivet shape that captures the metal plate.
    Ultrasonic spot welding: joins two layers of plastic sheet; a guide pin in the center of the horn pierces the upper sheet with ultrasonic vibration, and the vibration energy generates frictional heat indirectly at the plastic interface, welding the two sheets together.