Anti-theft tag welding machine – working principle:
    When ultrasonic energy acts on the contact surfaces of thermoplastics, it produces tens of thousands of high-frequency vibrations per second. This high-frequency vibration of sufficient amplitude transmits ultrasonic energy through the upper workpiece to the weld zone; since the weld zone—the interface between the two welds—has high acoustic resistance, localized high temperatures are generated. Because plastics conduct heat poorly, the heat cannot dissipate in time and accumulates in the weld zone, rapidly melting the contact surfaces of the two plastics; under pressure they fuse into one. After the ultrasound stops, pressure is maintained for a few seconds to let the joint solidify, forming a strong molecular chain that achieves the weld, with weld strength approaching that of the base material. Ultrasonic plastic weld quality depends on three factors: the amplitude of the transducer horn, the applied pressure, and the weld time. Weld time and horn pressure are adjustable; amplitude is determined by the transducer and booster. These three quantities interact around an optimum value: excessive energy melts too much plastic and deforms the workpiece; too little energy fails to weld firmly, and pressure must not be too great either. The optimum pressure equals the weld edge length multiplied by the optimum pressure per 1 mm of edge.
    Anti-theft tag welding machine  
    I. Welding:
    A horn vibrating at ultrasonic frequencies, under moderate pressure, generates frictional heat at the joint faces of two plastic parts, melting them together instantly. Weld strength can rival the base material; with suitable workpieces and a well-designed joint, watertight and airtight seals are achievable, eliminating the inconvenience of auxiliary materials and delivering efficient, clean welding.
    II. Staking:
    The ultrasonically vibrating horn presses against the protruding stud of the plastic part, instantly heating and melting it into a rivet shape that mechanically stakes materials of different types together.
    III. Insertion:
    Through horn vibration and appropriate pressure, metal parts (such as nuts and screws) are instantly pressed into pre-formed holes in the plastic and fixed at a set depth. The resulting pull-out and torque strength rival traditional in-mold forming, while avoiding damage to injection molds and slow injection cycles.
    IV. Forming:
    Similar to staking, a concave horn presses against the outer ring of the plastic part; the horn's ultrasonic vibration melts and forms the plastic so it encapsulates and fixes the metal object, with a smooth, attractive appearance. This method is widely used for fixing electronic components and speakers, and for securing lenses in cosmetics.
    V. Spot welding:
    A. Spot-welds two plastic sheets at discrete points with no pre-designed weld line, achieving the weld.
    B. For large workpieces or parts where a weld line is hard to design, spot welding at multiple points achieves the weld; several spots can be welded simultaneously.
    VI. Cutting and sealing:
    Using the principle of instantaneous ultrasonic oscillation, synthetic fabrics are cut cleanly—the cut edge is smooth, with no cracking or fraying.