Complete liquid filter bag welding equipment: 
    Jingjin Precision Machinery Co., Ltd. has launched a filter bag welding machine — a complete set of welding equipment for (polypropylene / polyester / terylene / polypropylene-fiber) filter bags. The bottom, sides and collar connections of hot-melt filter bags are all welded by ultrasonic and hot-melt methods. Traditional sewn liquid filter bags suffer from side leakage caused by pinholes and uneven material, as well as fiber shedding — all solved by this fully hot-melt welded liquid filter bag. The high-precision seamless liquid filter bag uses digitally aligned multi-point welding equipment to ensure every weld point stays the strongest and most consistent.
    Non-woven filter bag welding requires: one hot-air welding machine and two ultrasonic plastic welding machines, plus high-pressure air. Working environment: only 220 V power is needed. Steps: weld the filter bag center seam with the hot-air welding machine, weld the bag mouth with the bag-mouth welding machine, and weld the bag tail with the bag-tail welding machine.
Complete liquid filter bag welding equipment:
    The center-seam welding equipment for non-woven filter bags uses a steel-structure frame with a sliding rail structure; electric heating transfers heat from the heating blower to the weld area of the plastic part on the table, melting and forming it; under the pressure roller, the weld on the table plate quickly fuses, forms and solidifies to the desired effect, and the product slides out automatically under the traction wheel. The filter bag hot-air welding machine uses high-temperature hot-air radiant heating so that the inside and outside of the filter cloth overlap melt simultaneously, with synchronized rolling and solidification.
    The electrical panel has a power switch and hot-plate temperature display; the heating plate is heated by electric heating tubes, with the temperature controller controlling the temperature range; once set, the temperature adjusts automatically, and the actual temperature and target heating temperature are displayed on the panel — users can adjust to the actual needs of the plastic part welding so the weld meets the actual requirements. This equipment is easy to operate, reliable and compact, and improves production efficiency and quality. It is suitable for uninterrupted welding of plastic workpieces over 120 mm in diameter.
    Just one welding machine can weld PE and PO non-woven filter bag seams in arcs and straight lines (as flexibly as a sewing machine), covering filter bags over 50 mm in diameter — arc sections, center seams, bag sides — including all common and special shapes and sizes of filter bags. After welding, the weld area is as soft as the base material, and edge-locking stitches can be added on top as secondary insurance. The weld completely eliminates secondary fraying, producing a filter bag welded by hot air in the truest sense.
Complete liquid filter bag welding equipment:
    Filter bag hot-air welding equipment uses high-temperature hot-air radiant heating so that the inside and outside of the filter cloth overlap melt simultaneously, with synchronized rolling and solidification. Our filter bag hot-air welding machines are well loved by customers and are mainly used for welding non-woven filter bags, medium/high-efficiency filter bags, polypropylene filter bags, coarse filter bags, liquid filter bags, non-woven filter cartridges, air-conditioning filter bags, polypropylene non-woven filter bags, dust filter bags, filter cloth bags, polyester filter bags, polypropylene filter bags, polyester filter bags, louver-type air filters, square filter screens, mesh rings, tubular filter membranes, ultrafiltration tubes, water filter membranes, cell filter membranes, etc.
    Ultrasonic filter bag mouth welding: ultrasonic welding fuses the filter cloth to the PP plastic ring; a standard 180-diameter plastic ring arc needs six welds to complete a full circle, using an ultrasonic plastic welding machine. 
    Filter bag tail welding: ultrasonic welding seals the tail — it can be welded into a "V " shape using model 2615, requiring two welds to form the "V "; into a "⌒" shape using model 4215, requiring one weld to form the "⌒ "; or into a "一" (straight) shape using model 4215, requiring one weld to form the "一".