Ultrasonic Welding:
    Ultrasonic welding technology has been widely used since the 1960s. It offers many advantages, such as shorter production times and cost-effectiveness, which is why it is so widely adopted. To achieve ideal welds, however, factors such as material selection, part design, and energy director design must be considered. It is also limited to plastics with low melting points, and the properties of the plastic, the tensile strength required of the welded part, waterproofing needs, and the horn's available space and positioning must all be taken into account. Ultrasonic welding can roughly be divided into spot welding, single-rivet welding, and double-rivet welding. Spot welding gives lower weld strength but does not create a large weld head; single-rivet welding requires careful control of weld pressure to ensure the melted plastic is not broken by the horn under pressure, which would weaken the weld; double-rivet welding uses a wider horn, which may affect surface quality but delivers high weld strength. In actual production, the right welding method must be chosen to suit the need, ensuring the best product quality, appearance, and weld strength. This technology is mainly used for welding parts such as B5 door panels, pillars, and instrument panels.
    Non-Standard Ultrasonic Welding:
    Non-standard ultrasonic welding is used to weld large and complex workpieces. Since large, complex parts have weld surfaces in different directions and multiple locations must be welded at once, standard machines are no longer suitable and dedicated machines are needed for production, e.g. for automotive instrument panels, door panels, and bumpers. However, non-standard ultrasonic welding equipment requires a large one-time investment, and each machine can only produce one type of large, complex part, so it is not yet very widely used.
    Vibration Friction Welding:
    Vibration friction welding uses pneumatic or hydraulic transmission to drive the mold at a fixed frequency and amplitude, creating frictional heating that melts the workpiece to form the weld. It is a new technology featuring high efficiency, short cycle times, good quality, low noise, and low pollution. It can gradually solve surface issues and weld parts of many specifications; all models come with the same universal standard components, and parameters can be adjusted to suit the workpiece, with automatic frequency tracking. It can weld a wide variety of plastic products with virtually no size limitation, such as door panels, instrument panels, pillars, and intake manifolds.