Principle of Ultrasonic Cutting:
    When cutting with ultrasonic technology, the vibration generated by the ultrasonic vibration unit (the vibrator) — converting electrical energy into mechanical energy — is transmitted through the HORN to the pattern wheel (the cutting tool), whose rotary pressing produces the desired ultrasonic processing effect.
    Through the action of ultrasound, the grinding wheel blade undergoes instantaneous radial telescopic vibration, causing the abrasive grains and the workpiece to collide repeatedly at high acceleration in an extremely short time. As a result, a tiny fracture layer forms on the surface of the material being cut while it is being machined, greatly reducing the machining load on the grinding wheel blade. In addition, ultrasonic vibration creates a gap between the grinding wheel blade and the material being cut, greatly improving the cooling of the abrasive grains; by preventing grain dulling and pore clogging, it improves the machining quality of the cut material and extends the service life of the grinding wheel blade.
    Components of the Ultrasonic Cutting Assembly:
    The basic assembly consists of the ultrasonic transducer, booster, cutting blade (tool head), and drive power supply. The ultrasonic drive power supply converts mains power into high-frequency, high-voltage AC current and feeds it to the ultrasonic transducer. The ultrasonic transducer is essentially an energy conversion device that converts the input electrical energy into mechanical energy — i.e., ultrasound. It manifests as the transducer's longitudinal back-and-forth telescopic motion, whose frequency equals that of the high-frequency AC current supplied by the drive power. The booster's role is, first, to fix the entire ultrasonic vibration system, and second, to amplify the transducer's output amplitude. The cutting blade (tool head) further amplifies the amplitude and focuses the ultrasound on the one hand, and outputs the ultrasound on the other — using the blade-like edge of the cutting tool to concentrate ultrasonic energy into the cutting zone of the material. Under the enormous ultrasonic energy, that zone softens and melts instantaneously, and its strength drops sharply. At that point, only a very small cutting force is needed to cut the material.
    Application Fields of Ultrasonic Cutting:
    Ultrasonic blade-type cutters and ultrasonic anvil-type cutters are designed for different uses. Ultrasonic blade-type cutters suit cutting of coarse, thick, long materials where an anvil cannot easily be placed — such as slitting raw rubber from rubber mixers, tube cutting, frozen meat, candy and chocolate cutting, printed circuit boards, or handheld cutters. To meet embossing-cutting needs, a cylindrical pattern wheel can be added on the cutting anvil to cut endlessly varied patterns at very low cost and extremely high efficiency. This cutting method suits thin sheet materials, such as all kinds of trademarks, garment lace, fabric cutting, decorative sequin cutting, natural fibers, synthetic fibers, non-woven fabrics, synthetic resins, paper, film cutting and slitting, and more.