How the Cable Tie Strap Welding Machine Works:
    The cable tie strap welding machine uses ultrasonic principles to weld hook-and-loop fasteners onto nonwoven fabric, and embosses patterns or the company logo onto the fabric as required. Welds are strong and embossing is clear; welding width is adjustable; it can weld simultaneously with easy leveling.
    The cable tie strap welding machine is mainly used for welding quick-clean cloths, nonwoven floor mops and the like. It needs no thread, no glue and no auxiliary materials to bond all kinds of fabrics — hook-and-loop fasteners, elastic bands, webbing, etc.
    The cable tie strap welding machine transmits ultrasonic waves through the horn to the plastic workpiece, causing intense friction between the two plastic joint surfaces under ultrasonic action; friction heat melts the joint surfaces for a complete bond. This technology is fast and produces strong welds; most importantly, it enables automated plastic product processing.
    The cable tie strap welding machine uses a transistor power device to convert the incoming 50/60Hz mains frequency into high-frequency 20kHz or 40kHz electrical energy, which is supplied to the converter. The converter turns electrical energy into mechanical vibration energy for ultrasonic use; the pressure-regulating device transfers the converted mechanical energy to the horn of the ultrasonic welding machine. The horn is an acoustic device that transmits mechanical vibration energy directly to the product being pressed: vibration passes through the workpiece to the bonding surface, friction generates heat that melts the plastic; vibration stops once the molten material reaches its interface, and brief pressure holding lets the molten material form a strong molecular bond as it solidifies at the bonding surface. The whole cycle is usually completed in less than a second, yet the weld strength approaches that of a single continuous piece of material.