Storage Battery Welding Machine — Overview:                                                      
    1. Equipment name: plastic hot plate welding machine
    2. Model: battery-specific
    3. Welding target: storage battery / power battery box covers
    4. Welding medium: heat welding; no medium required
    5. Capacity: 3 shifts per day 8 hours per shift
    6. Welding requirements:
    1) Smooth surface with no stringing; watertight and airtight under normal conditions; strong welds
    2) After welding, the three-point weld error must be smaller than the specified dimensions
    3) Detailed technical requirements to be provided by the buyer when the contract is signed by both parties
    7. Cycle time: 20-40 seconds per piece 
    Specifications and Parameters of the Storage Battery Welding Machine:                                                           
    Main machine dimensions: (L) 1600×(W) 2600×(H) 2200(MM)
    Power supply: 380VAC 50/60HZ three-phase five-wire
    Heating power: 1-2KW       Hot plate in/out stroke:       0-300-350mm
    Power consumption: 1-2KW       Upper/lower platen stroke:     0-175-250mm
    Air supply: 1M3/MIN at 0.6MPa 
    Max weld area: 300mm×200mm
    Machine weight: 800KG 
    Machine Structure and External Protection:
    1. Welded frame with height-adjustable leveling feet at the base for easy machine leveling;
    2. All protective panels made of A3 cold-rolled steel sheet;
    3. Safety light curtain protects the operator while loading and unloading the upper and lower workpieces;
    4. Upper moving platen \ lower fixed platen made of 45# steel with surface treatment for a smooth finish; warp-free with long service life. Standard mold/tooling interfaces are provided for easy manual mold change and positioning;
    5. Upper/lower moving platen guide pillars (4 each), 50mm diameter, surface finish<0.08, verticality and coaxiality<0.025mm;
    6. Upper/lower moving platen guide bushings: 50mm ID, 150mm long, 0.025mm sliding clearance with the guide pillars;
    7. Hot plate mechanism (with 2 sets of horizontal linear guides, 0.025mm sliding clearance between guides and pillars;
    8. Heating plate made of imported aluminum alloy, effective hot plate area 300*200. 
    Welding Process (fully automatic —  just load/unload parts and  press the start button)      
    Load the lower plastic part of the product → lower fixture clamps → Load the upper plastic part of the product → upper fixture grips by suction → Press the start button → Left/right hot plates advance → Lower platen rises, upper platen descends (moving toward each other simultaneously) → Hot pressing → Upper platen rises, lower platen descends → Left/right hot plates retract → Upper platen descends, lower platen rises → bonding → Upper fixture releases → upper platen rises, lower platen descends → lower fixture releases → Remove the product