The water pump impeller welding machine is designed for the cross-flow fan blade welding needs of the air-conditioning industry. The ultrasonic cross-flow impeller welder draws on the shortcomings of earlier cross-flow fan blade welders and improves on them, minimizing balance runout of the finished product, with each welded section dimensionally self-controlled.
Working principle: uses ultrasonic welding, with an automatic clamping fixture to increase welding speed and ensure welding precision.
    The machine consists of three parts: the master control cabinet, the main unit, and the ultrasonic welding tooling.
    1. Master control cabinet: the electrical controls, main power switch, ultrasonic weld time, HMI, and alarm devices are all installed on the master control cabinet. Welding speed and program changes are all operated via the cabinet's HMI.
    2. Main unit: consists of the main worktable (automatic clamping device) and the ultrasonic welding machine.
    3. Welding tooling: tooling for the ultrasonic cross-flow impeller welder.
    Configuration highlights: 1. Excellent weld results for products with large, complex weld areas and demanding weld requirements. 2. Digital weld parameter setting—intuitive and accurate. 3. Precise current and time control during welding for better weld quality. 4. Assembled from a full set of quality imported components for stable performance.
    Design concept: 1. Sliding-table machine with PLC control. 2. Suits long workpieces, large areas, multi-unit parts, etc. 3. Can be designed with multiple heads driven synchronously so the workpiece is finished in one pass, simplifying the traditional multi-pass process. 4. Time-saving, fast, and attractive welds. 5. Automatic frequency tracking and overload protection for stable quality.
    Technical requirements:
    1. The base is driven by a 130 stepper motor; the control system uses PLC control with Japanese-imported PLC capable of storing 302 or more data sets. Touchscreen operation, 8 inches or larger.
    2. All pneumatic components are AirTAC products.
    3. Electrical components are CHINT or equivalent imported components.
    4. Base welding range: 60–120 mm; weldable length: 0–1000 mm.
    5. The four fixtures must be parallel and perpendicular to the base plate (middle pallet), with perpendicularity <0.02mm. Fixture shafts use 40 mm diameter round shafts, quenched and tempered, with surface hardening and hard-chrome plating.
    6. One set each of base and pallet (84, 91) included.
    7. The worktable runs smoothly at speeds over 10 m/min.
    8. Ultrasonic frequency: 15 kHz.