How an ultrasonic hot-air automatic welding machine works:
A filter bag hot-air welding machine uses high-temperature hot-air radiant heating so that the inside and outside of the filter cloth overlap melt simultaneously, with synchronized rolling and solidification. Specifically, it uses a sliding rail structure: electric heating transfers heat from the heating blower to the weld area of the plastic part on the table, melting and forming it; under the pressure roller, the weld on the table plate quickly fuses, forms and solidifies to the desired effect, and the product slides out automatically under the traction wheel. It applies the working principle of a 20 kHz (or 15 kHz) high-voltage, high-frequency signal generated by the generator, converted by the transducer system into high-frequency mechanical vibration applied to the plastic workpiece; friction between the workpiece surface and its inner molecules raises the temperature transmitted to the interface, and when the temperature reaches the melting point of the workpiece itself, the workpiece interface melts rapidly and fills the gaps at the interface; when the vibration stops and the workpiece cools and sets under a certain pressure, a perfect weld is achieved.
Advantages of ultrasonic hot-air automatic welding:
1. Ultrasonic welding needs no needle and thread — no more frequent needle changes, no broken-thread joints as in traditional sewing; textiles can also be neatly cut locally and sealed. The seam is decorative as well, with strong bonding, waterproof results, clear embossing, a more three-dimensional relief effect on the surface, fast working speed, and an upscale, attractive product finish; quality guaranteed.
2. Non-woven welding machines use ultrasound with a specially made steel wheel: sealed edges do not crack, fabric edges are not damaged, and there is no fraying or curling.
3 . Non-woven sewing machines need no preheating and can run continuously.
4 . Easy to operate — not much different from operating a traditional sewing machine; ordinary sewing workers can operate it.
5 . Non-woven welding equipment is low-cost and 5 to 6 times faster than traditional machines — highly efficient.
Applications of the ultrasonic filter bag hot-air welding machine:
The electrical panel of the filter bag hot-air welding machine has a power switch and hot-plate temperature display; the heating plate is heated by electric heating tubes, with the temperature controller controlling the temperature range; once set, the temperature adjusts automatically, and the actual temperature and target heating temperature are displayed on the panel — users can adjust to the actual needs of the plastic part welding so the weld meets the actual requirements. It is easy to operate, reliable and compact, and improves production efficiency and quality. Filter bag hot-air welding machines are suitable for welding polypropylene, polyester, nylon, terylene and polypropylene-fiber materials, generally used for non-woven filtration, monofilament mesh filtration and multifilament mesh filtration — especially for uninterrupted welding of plastic workpieces over 120 mm in diameter.