The plastic sheet ultrasonic welding machine turns manual work into fully automatic machine welding — no welding rods needed, no more water leakage. It lowers your labor costs, raises labor efficiency, and saves sheet material, so your costs go down. The fully automatic plastic butt welder is an electromechanical integrated automatic machine, developed based on the heating-and-fusing principle of plastic sheets. It suits drawer-type hot welding of heat-fusible plastic sheets in PE/PP/PB/PVDF materials. The system uses microcomputer control with pressure regulation; no welding rods are needed — the sheet material melts and joins by itself, with a flat, attractive interface and high strength.
    Technical Parameters of Plastic Sheet Welding:
    Maximum sheet butt length: 3000 mm
    Butt sheet thickness range: 2–30 mm
    Equipment Operating Conditions:
    8 kg/cm stable compressed air source
    380 V three-phase AC power supply
    Plastic sheet hot welder total power: 4.5 kW
    Rated current: 13.5 A
    Recycled plastic sheet hot plate welding: heating the joint areas of thermoplastic sheets by direct contact on a heated metal plate, then pressing them to fuse. To prevent plastic from sticking to the metal plate, a layer of PTFE or silicone resin is often coated on the metal plate. This method is simple, highly reliable, and produces strong welds, suiting nearly all thermoplastics. The hot plate can be replaced by a metal mold or hot roller. Recycled plastic sheets are welded with a soldering iron (heat transfer through a hot blade): a hot blade is attached to an ordinary electric soldering iron to bridge the sheets. During welding, once the soldering iron and hot blade reach the preset temperature, the hot blade contacts both surfaces to be welded simultaneously and keeps moving; an automatic roller then presses the two molten surfaces tightly together.